Aaa method commands, Aaa method commands -101, Privilege – Enterasys Networks X-Pedition XSR CLI User Manual
Page 645: Aaa method commands aaa method
AAA Method Commands
XSR CLI Reference Guide 16-101
privilege
This command configures the privilege level of a user. It is available from both AAA User and
AAA Group configuration modes. Compare this command with the Interface mode
privilege
Syntax
privilege level (0-15)
Syntax of the No Form
Use the no form of this command to restore the privilege level default:
no privilege
Default
0
Mode
AAA User/Group configuration:
XSR(aaa-user)#
or
XSR(aaa-group)#
Example
The following example specifies a privilege level of 15 for user kramer:
XSR(config)#aaa user kramer
XSR(aaa-user)#privilege 15
AAA Method Commands
aaa method
This command is executed at the Global Mode.
This command configures the AAA method (plug‐in) to be used. The following sub‐commands
are available in AAA Method mode:
•
acct-port -
Sets the UDP port for accounting requests. Refer to
command definition.
•
address -
Specifies the RADIUS server address with either a host name or IP address. Refer
to
for the command definition.
•
attempts -
Sets the number of consecutive login attempts that must fail before the RADIUS
methodʹs backup method is used. Refer to
•
auth-port -
Specifies the UDP port for authentication requests. Refer to
command definition.
•
backup
‐ Specifies a name for a backup RADIUS method name. Refer to
for the
command definition.
level
Specifies the privilege level (0‐15) associated with this user.