Enterasys Networks X-Pedition XSR CLI - Manual (Page 82)

T1/E1 and T3/E3 Clear and Show Commands
2-76 Configuring T1/E1 and T3/E3 Subsystems
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4
Rx ABCD * * * * * * F F 0 * F F F F F F F F F F F F F F
Channel 1:
Timeslots 1,2,3,4,5,6,7,8,9,10
64kbps Base rate
Channel 2:
Timeslots 12,13
56kbps Base rate
Data in current interval (502 seconds elapsed):
0 Line Code Violations
0 Path Code Violations
0 Slip Seconds
0 Frame Loss Seconds
0 Line Error Seconds [string]
0 Degraded Minutes
0 Errored Seconds
0 Bursty Error Seconds
0 Severely Error Seconds
0 Unavailable Seconds
Total Data (last 24 hours):
0 Line Code Violations
0 Path Code Violations
0 Slip Seconds
0 Frame Loss Seconds
0 Line Error Seconds
0 Degraded Minutes
0 Errored Seconds
0 Bursty Error Seconds
0 Severely Error Seconds
0 Unavailable Seconds
The following line is added to the output if loopback is set as line:
Central Office (Network) loopback is set as line.
The following is a partial example of the output from a T3 NIM:
XSR#show controllers t3 0/1/0
T3 0/1/0 is Admin Down and Oper Down.
Appliqué type is Un channelized T3.
Loopback is set as none.
Equipment is set as customer.
MDL transmission is disabled.
Cablelength range is 0-224 feet.
Framing is C-BIT, Clock Source is Line.
Scramble is disabled.
DSU is set to None with bandwidth 44210 kbps.
Description: None
FEAC codes Received: