Neighbor shutdown, Neighbor soft-reconfiguration inbound – Enterasys Networks X-Pedition XSR CLI User Manual
Page 298
BGP Configuration Commands
6-102 Configuring the Border Gateway Protocol
Example
The following example sets a neighbor’s community:
XSR(config)#router bgp 100
XSR(config-router)#neighbor 192.168.1.1 remote-as 101
XSR(config-router)#neighbor 192.168.1.1 send-community
neighbor shutdown
This command disables a neighbor or peer‐group.
Syntax
neighbor {ip-address | peer-group-name} shutdown
Syntax of the “no” Form
The no form of this command returns to the command default:
no neighbor {ip-address | peer-group-name} shutdown
Mode
Router configuration:
XSR(config-router)#
Default
No change is made to status of BGP neighbor or peer group.
Example
This example disables any active session for neighbor 192.168.1.1:
XSR(config)#router bgp 100
XSR(config-router)#neighbor 192.168.1.1 remote-as 101
XSR(config-router)#neighbor 192.168.1.1 shutdown
neighbor soft-reconfiguration inbound
This command instructs the system to store updates as they are received. Updates are required to
be stored in order to perform inbound soft reconfiguration.
Syntax
neighbor {ip-address | peer-group-name} soft-reconfiguration inbound
ip-address
Neighbor’s IP address.
peer-group-name
BGP peer group by name. Range: 1 to 64 characters.
ip-address
Neighbor’s IP address.
peer-group-name
BGP peer group by name. Range: 1 to 64 characters.