Enterasys Networks X-Pedition XSR CLI - Manual (Page 392)

Multilink Show Commands
8-122 Configuring the Point-to-Point Protocol
Multilink Show Commands
show interface multilink
This command displays multilink interface statistics including MLPPP status for both the bundle
and the member link.
Syntax
show interface multilink [number]
Mode
EXEC: XSR>
Sample Output
Thefollowing is sample output for Multilink interface 8:
XSR>show interface multilink 8
********** Multilink Interface Stats **********
Multilink 8: MLPPP is Admin Up / Oper Up
Group Num: 8
LCP State:
OPENED
IPCP State: OPENED
Multilink State: OPENED
Multi-Class State: OPENED
Multilink header format is LONG SEQ NUM
Class suspendable level is 5 tx classes and 5 rcv classes
Max Fragment delay is 10 ms
MLPPP Bundle Info:
Control Object state is Admin Down / Oper Down
Multilink PPP has no memberlinks
Data Object state is Admin Down
The adjacent is DOWN and data passing is FALSE
Bundle size is 0
Max Load Threshold: 0
Total Load Bandwidth is 64000 bits/sec
Bundle Stats
Rx: Total 0, TX: Total 0
Data 0, Data 0
Ctrl 0, Ctrl 0
Null 0, Null 0
Drop 0, Drop 0
Rx Load BW Avg 0, Max 0, Min 0
Tx Load BW Avg 0, Max 0, Min 0
card/port The ML interface port for viewing link status, statistics and configuration data.
number Logical interfaces.