Enterasys Networks X-Pedition XSR CLI - Manual (Page 252)

IP Clear and Show Commands
5-176 Configuring the Internet Protocol
show ip static database
This command displays static route information including the destination IP address, gateway IP
address, and administrative distance.
Syntax
show ip static database [A.B.C.D. A.B.C.D./mask | interface-type | distance]
Mode
EXEC configuration: XSR>
Sample Output
The following is sample output:
XSR#show ip static database
Maximum number of multiple static routes: 4
Routing Information Sources:
Address Gateway Distance
7.0.0.0/8 Null0 1
1.1.1.0/24 2.2.2.2 1
Parameter Description
E2 OSPF external type 2 route
* Candidate default route
D Default route originated from default network
U User‐configured static route
[x/y] Distance/metric information
[0060] Route cost
distance Distance, ranging from 1 to 120 hops.
A.B.C.D. Next hop
A.B.C.D./<0-32> IP address and mask
interface-type XSR interface type: BRI, Dialer, Loopback, Multilink, Serial , VPN, or Fast/
GigabitEthernet.
Maximum number of
multiple static routes The maximum number of routes with the same destination but different
next hop.
Address The route.
Gateway The next hop to reach the address.
Distance The value of the administrative distance, which is a measure of
trustworthiness of the routing update. The lower the value, the more
trustworthy the source of the update.