Enterasys Networks X-Pedition XSR CLI - Manual (Page 505)

QoS Show Commands
XSR CLI Reference Guide 12-109
show random-detect interface
This command displays data about Random Early Detection (RED).
Syntax
show random-detect interface [interface-type interface-number]
Mode
EXEC: XSR> or XSR(config)#
Sample Output
The following commands configure policy‐map Shape:
XSR(config)#policy-map Shape
XSR(config-pmap<Shape>)#class d32
XSR(config-pmap-c<d32>)#bandwidth per 30
XSR(config-pmap-c<d32>)#random-detect dscp-based
XSR(config-pmap-c<d32>)#random-detect dscp 32 10 20 10
XSR(config-pmap-c<d32>)#random-detect dscp default 2 5 20
The following is sample output from the command. There are drops only from class d32.
XSR#show random-detect interface serial 1/0:0
Serial 1/0:0
output: Shape
output: Shape
Class d32
Weighted Random-detect:
Avg Qsize: 5, Total Random Drops: 2223
Tail drops Sum of packets dropped by Tail Drop buffer management.
Tx Sum of packets transmitted successfully.
NoBuff Sum of packets rejected by the driver because of no buffer. This value is
always zero when the policy map is applied to DLCI and MLPPP.
Error Sum of transmit (driver) errors when trying to send out a packet. Value
is always zero when the policy map is applied to DLCI and MLPPP.
Avg Qsize RED average queue size.
Random Drops Sum of packets dropped by RED.
min-th Configured minimum threshold for RED.
max-th Configured maximum threshold for RED.
mark-prob Configured mark probability for RED.
interface-type The type of interface.
interface-number The number of the interface.