Enterasys Networks X-Pedition XSR CLI - Manual (Page 444)

Dialer Interface Clear and Show Commands
10-90 Configuring the Dialer Interface
Syntax of the “no” Form
The no form of this command removes the modem‐init‐string:
no modem-init-string
Mode
Map‐Class Dialer configuration: XSR(config-map-class<xx>)#
Example
The following example specifies a modem initialization string to disable dialtone detection for the
Map Class Remote:
XSR(config-map-class<Remote>)#modem-init-string ATX3
Dialer Interface Clear and Show Commands
clear dialer
This command clears dialer statistics for physical interfaces connected to the dialer interfaces. If
the interface is not specified, all interface (for the dialer) statistics will be cleared.
Syntax
clear dialer
Mode
Privileged EXEC: XSR#
Example
XSR#clear dialer
show dialer
This command displays general information and some configurations of interfaces configured
under the dialer; for instance, the dialer interfaces and the serial and async interfaces under the
dialer interfaces.
Syntax
show dialer [number]
Mode
Privileged EXEC: XSR#
number Interface number.