Enterasys Networks X-Pedition XSR CLI - Manual (Page 183)

OSPF Debug and Show Commands
XSR CLI Reference Guide 5-107
OSPF: Tx LSA. external, age:017a opt:20 id:13.0.0.0 rid:10.0.0.1 seq:80000088
chk:807a l:36 from GigabitEthernet 2
The following example displays a received LSA acknowledgement:
OSPF: Rx Ack. external, nbr:10.0.0.1 age:017b opt:20 id:13.0.0.0 rid:10.0.0.1
seq:80000088 chk:807a l:36
The following example displays an LSA Updated/Modified in the database:
OSPF: Upd LSA. summary, aid:00000005 age:0000 opt:02 id:1.1.1.3 rid:1.1.1.4
seq:80000099 chk:4a2d l:28
The following example displays a retransmitted LSA:
OSPF: RTx LSA. summary, nbr:10.0.0.1 age:0000 opt:02 id:2.2.3.0 rid:1.1.1.4
seq:80000097 chk:1f8f l:28
Parameter Descriptions
debug ip ospf nbr
This command debugs OSPF neighbor events. As with all XSR debug commands, it is set to
privilege level 15 by default.
Add LSA OSPF Lsa Added to database
summary OSPF Summary LSA
aid:0.0.0.4 OSPF LSA Area id
age:0000 OSPF LSA Age
opt:02 OSPF LSA Options
id:53.53.53.0 OSPF LSA Identifier
rid:1.1.1.4 OSPF LSA Router Id
seq:80000001 OSPF LSA Sequence Number
chk:4867 OSPF LSA Checksum
l:28 OSPF LSA Length
Rx LSA OSPF LSA Received
router OSPF Router LSA
Queue Delayed Ack OSPF Queued Delayed Acknowledgement
asbr-summary OSPF AS Border Router Summary LSA
Tx LSA OSPF LSA Transmitted
Rtx LSA OSPF LSA retransmitted (from retransmission queue)
external OSPF External LSA
from GigabitEthernet 2 Outgoing interface
Rx Ack OSPF Received Link State Acknowledgement
Upd LSA OSPF LSA Updated/Modified in database
Note: This command does not display in running config because it is a debug function. It must be
set manually every time the XSR is rebooted.