Enterasys Networks X-Pedition XSR CLI - Manual (Page 513)

Other ADSL Commands
XSR CLI Reference Guide 13-87
Syntax
cmv save file-name
Mode
ATM Interface configuration: XSR(config-if<ATMxx>)#
Example
The following example saves the CMV training list to file retrain‐list:
XSR(config-if<ATM0/1/1>)#cmv save retrain-list
Save complete
XSR(config-if<ATM0/1/1>)#
Other ADSL Commands
description
This command adds a description string to an existing ATM interface object.
This command requires that the ADSL NIM be installed and the DSP firmware file be present in
the
Flash: directory.
Syntax
description description_text
Syntax of the “no” Form
The no form of this command sets the description text to an empty string:
no description
Mode
ATM Interface configuration: XSR(config-if<ATMxx>)#
Example
The following example adds ADSL Line to the interface object:
XSR(config-if<ATM0/1/1>)#description “ADSL Line”
file-name The name of the file used to save the CMV training list.
description_text A text string that describes the interface object. Text with embedded
spaces must be enclosed in double quotes. Omitting the description text
results in an empty description string.