Enterasys Networks X-Pedition XSR CLI - Manual (Page 534)

ATM Clear and Show Commands
13-108 Configuring ADSL
Examples
The following is sample output when an interface is specified:
XSR#show interface atm 1/0
********** ATM Interface Stats **********
ATM 1/0 is Admin Up / Oper Up
The name of this device is adsl
Administrative State is ENABLED
Operational State is UP
OAM circuit is UP
The upstream data rate is 480 kbit/sec
The downstream data rate is 10208 kbit/sec
General info:
ifindex 0
ifType 0
ifAdminStatus 1
ifOperStatus 1
ifLastChange 00:02:34
ifInOctets 2950
ifInUcastPkts 47
ifInNUcastPkts 0
ifInDiscards 0
ifInErrors 0
ifInUnknownProtos 0
ifOutOctets 5088
ifOutUcastPkts 48
ifOutNUcastPkts 0
ifOutDiscards 0
ifOutErrors 0
ifOutQLen 100
AAL5 in 47
AAL5 out 48
HEC errors 0
AIS F4 0
RDI F4 0
CC F4 0
LPBK F4 0
VPI/VCI AAL5 AIS RDI CC LPBK AIS/RDI
1/32 00000047 00000000 00000000 00000000 00000000
The following is sample output when a sub‐interface is specified:
XSR#show interface atm 1/0.1
********** ATM Sub-Interface Stats **********
ATM 1/0.1 is Admin Up / Oper Up
Internet address is 30.0.0.11, subnet mask is 255.255.255.255
LCP State: OPENED
IPCP State: OPENED
PPPoE is Oper Up