Enterasys Networks X-Pedition XSR CLI - Manual (Page 370)

PPP Debug, Clear and Show Commands
8-100 Configuring the Point-to-Point Protocol
XSR#show ppp interface
********** PPP Stats **********
Serial 1/0:0: PPP is Admin Up / Oper Up / Link Speed: 64000
LCP Current State: OPENED
IPCP Current State: OPENED
Multilink Current State: OPENED
LCP STATS
Total Rcv Pck: 0
Total Rcv Control Pck: 0
Total Rcv Data Pck: 0
Total Rcv Pck Discarded: 0
Total Tx Pck: 0
Total Tx Control Pck: 0
Total Tx Data Pck: 0
Total Tx Pck Discarded: 0
Rx Control Pck Discarded: 0
Rx Control Pck Error: 0
Rx Control Pck Unknown protocol: 0
Rx Control Pck Too Long: 0
LocalToRemoteProtocolCompression: Disabled
RemoteToLocalProtocolCompression: Disabled
LocalMRU: 1500
RemoteMRU: 1500
ReceiveFcsSize: 16
TransmitFcsSize: 16
LQR STATS
No LQM Monitoring
LCP CONFIGURATION
InitialMRU: 1500
MagicNumber: true
FcsSize: 16
LQR CONFIGURATION
Period: 10 sec
Status: Disabled
show ppp
This command displays all configured PPP ports and status including Link Control Protocol
(LCP) and Link Quality Monitoring (LQM) states.
Syntax
show ppp