Enterasys Networks X-Pedition XSR CLI - Manual (Page 531)

ATM Clear and Show Commands
XSR CLI Reference Guide 13-105
The following is sample output when a sub‐interface is specified:
XSR#show controllers atm 1/0.1
********** ATM Sub-Interface Stats **********
ATM 1/0.1
Packet Processor Tx Scheduler Stats:
952 Packet driver Tx OK
0 Packet driver not Tx: MUX END_ERR_BLOCK
0 Packet driver not Tx: MUX ERROR
0 Packet driver not Tx: Unknown Msg from MUX
Statistic Counters:
Rx PacketTotalCount 987
Rx PacketDiscardCount 18
Rx MuxHeaderError 0
Rx SnapHeaderError 0
Rx PPPoEethTypeError 0
Rx PPPoEethTypeARP 6
Rx PPPoEethTypeIP 12
Rx PPPoEethTypeRARP 0
Tx PacketTotalCount 952
Tx PacketDiscardCount 0
********** ATM Data Object Stats **********
Upper Adjacent is CONNECTED and UP, ATM PassData is TRUE
FE: Admin Up / Oper Up PPPoE: Oper Up
********** Driver Virtual Circuit Stats **********
VPI/VCI 1/32:
ccRx1 987
ccRx2 987
received-adslr1 987
noeop 0
crc 0
wor 0
ovr 0
toomany 0
stop 0
be1 0
be2 0
receivertnerr 0
nonewmblk 0
receivertnnull 0
tx_null_mblk 0
tx_no_enable 0
tx_length_err 0
sent-adslt 952
tx_no_free_slots 0
tx_no_showtime_loop 0