Enterasys Networks X-Pedition XSR CLI - Manual (Page 325)

BGP Clear and Show Commands
XSR CLI Reference Guide 6-129
Hold time is 90, keepalive interval is 30 seconds
Neighbor capabilities:
Route Refresh: advertised & received
Address family IPv4 Unicast: advertised & received
Received 11 messages, 1 notifications
Sent 10 messages, 1 notifications, 0 in queue
Route Refresh request: received 0 sent 0
Last reset: Peer connection reset
3 accepted prefixes
Outgoing update AS path filter list is 33
Route map for outgoing advertisements is 60
Display Parameters
BGP neighbor IP address of the BGP neighbor and its AS number. If the neighbor is in
the same AS as the router, then the link between them is internal
(IBGP), otherwise it is considered external (EBGP).
BGP neighbor AS of the neighbor.
external link This is an EBGP peer.
BGP version BGP version used to communicate with the peer.
remote router ID IP address of the neighbor.
BGP state Internal state of the BGP connection.
Hold Time Maximum interval, in seconds, that can elapse between messages from
the peer.
keepalive interval Interval, in seconds, between sending keepalive packets.
Neighbor capabilities BGP capabilities advertised and received from this neighbor.
Route Refresh Status of the route refresh capability.
Address family IPv4
Unicast IP Version 4 unicast‐specific properties.
Received Sum of BGP messages received from this peer, including keepalives.
notifications Sum of error messages received from the peer.
Sent Sum of BGP messages sent to this peer, including keepalives.
notifications Sum of error messages sent from this XSR to the peer.
Route refresh request Sum of route refresh requests sent and received from this neighbor.
Last Reset Previous reset reason.
accepted prefixes Number of prefixes accepted.