Enterasys Networks X-Pedition XSR CLI - Manual (Page 435)

Frame Relay Clear and Show Commands
XSR CLI Reference Guide 9-111
The card is 2.
The channel is 0.
The current MTU is 1506.
The device is in polling mode, and is active.
The last driver error is (null).
The physical-layer is HDLC-SYNC, the TX, RX clock source is external.
The device uses CRC-16 for Tx.
The device uses CRC-16 for Rx.
The type of encoding is NRZ.
The media-type is RS-232/V.28 (DTE).
The loopback mode is off.
Other Interface Statistics:
ifindex 0
ifType 23
ifAdminStatus 1
ifOperStatus 1
ifLastChange 00:00:24
ifInOctets 0
ifInUcastPkts 0
ifInNUcastPkts 0
ifInDiscards 0
ifInErrors 0
ifInUnknownProtos 0
ifOutOctets 173
ifOutUcastPkts 10
ifOutNUcastPkts 0
ifOutDiscards 0
ifOutErrors 0
ifOutQLen 352
RX overrun 0