Enterasys Networks X-Pedition XSR CLI - Manual (Page 57)

RTR-mode Commands
XSR CLI Reference Guide 1-43
RTR-mode Commands
rtr
This command creates a Response Time Reporter (RTR) entry. The following are sub‐commands:
• rtr owner registers the RTR administrator. Go to page 1‐43 for the command description.
• rtr schedule configures when an RTR entry will be run. Go to page 1‐44 for the command
description.
Syntax
rtr operation-id
Mode
Global configuration: XSR(config)#
Next Mode
RTR configuration: XSR(config-rtr-xx)#
Example
The following command configures RTR entry 1 and acquires RTR mode:
XSR(config)#rtr 1
XSR(config-rtr-1)#
rtr owner
This command registers the Response Time Reporter (RTR) administrator (owner).
Syntax
rtr owner {owner-name}[ipAddress][quota quota][email email][sms sms]
Mode
Global configuration: XSR(config)#
operation-id Measurement ID number, ranging from 1 to 2,147,483,647.
owner-name: Ownerʹs name which is case sensitive and must contain no spaces.
ipAddress IP address of the management entity.
quota Maximum number of records for this owner in the Enterasys service
level reporting MIB history table, ranging from 1 to 10,500.
email Ownerʹs Email address.
sms Ownerʹs SMS phone number. It must not contain a space.