Aaa usergroup commands, Aaa usergroup commands -94, Aaa usergroup commands aaa group – Enterasys Networks X-Pedition XSR CLI User Manual
Page 638
AAA Usergroup Commands
16-94 Configuring Security
Mode
Global configuration:
XSR(config)#
Examples
The following example configures the Telnet sub‐system to use the AAA sub‐system:
XSR(config)#aaa client telnet
The following example configures the SSH sub‐system to accept AAA:
XSR(config)#aaa client ssh
AAA Usergroup Commands
aaa group
This command adds a local user group and acquires Usergroup configuration mode. Each user
defined in the node must belong to one group only. The following sub‐commands are available in
Usergroup mode:
•
dns server
‐ Sets the address of DNS servers. Refer to
for the command
definition.
•
ip pool
‐ Links a globally defined pool of IP addresses to the user group. Refer to
•
pptp encrypt mppe
‐ Enables MPPE encoding on a PPTP connection. Refer to
the command definition.
•
privilege
‐ Sets the privilege level of a user. Refer to
for the command definition.
•
wins server
‐ Sets the address of WINS servers. Refer to
definition.
Syntax
aaa group group-name
Syntax of the “no” Form
The no form of this command deletes the group:
no aaa group group-name
Default
There is a default group named DEFAULT.
Mode
Global configuration:
XSR(config)#
Next Mode
Usergroup configuration:
XSR(aaa-group)#
group-name
Name of the group.