Enterasys Networks X-Pedition XSR CLI - Manual (Page 529)

ATM Clear and Show Commands
XSR CLI Reference Guide 13-103
ppp timeout retry
This command sets the maximum time to wait for a response during PPP negotiation. It requires a
properly configured ATM sub‐interface specifying encapsulation type PPPoA or PPPoE.
Syntax
ppp timeout retry <seconds>
Syntax of the “no” Form
The no form of this command returns this parameter to its default setting:
no ppp timeout retry
Mode
ATM Sub‐Interface configuration: XSR(config-if<ATMx/x/x.x>)#
Default
3 seconds
Example
This example resets the maximum wait time for a response during PPP negotiation to 12 seconds:
XSR(config-if<ATM0/1/0.1>)#ppp timeout retry 12
ATM Clear and Show Commands
clear counters atm
This command clears ATM counters for the ATM interface.
Syntax
clear counters atm {slot/card/port}
Mode
Privileged EXEC: XSR#
seconds The peak wait interval, ranging from 1 to 255 seconds.
slot The XSR slot number, ranging from 0 to 2.
card The XSR NIM number, ranging from 1 to 2.
port The XSR slot number: 0. The sub‐interface number ranges from 1 to 30.