Nortel Networks 1000E - Manual (Page 159)

Configuring the CS 1000E CP PM Call Server Page 159 of 466
Communication Server 1000E Installation and Commissioning
10 Enter the command:
TTYLOG NO
11 Enter the command:
BANR YES
System response:
MEM AVAIL: (U/P):1019130 USED U P: 138064 22453
TOT: 3555327
DISK RECS AVAIL: 491
TMDI D-CHANNELS AVAIL: 0 USED: 0 TOT: 0
DCH AVAIL: 80 USED: 0 TOT: 80
AML AVAIL: 15 USED: 1 TOT: 16
ADAN DATA SAVED
12 Enter the command:
ADAN ****
End of Procedure
Checking PTY status
Follow Procedure 33 to check the PTY status.
Procedure 33
Checking PTY status
Pseudo-terminals show enabled only if you are using them.
1 Enter the command:
LD 37
2 Enter the command:
STAT
System response:
TTY 0: ENBL DES: ...
TTY 1: ENBL DES: ...
TTY 2: ENBL DES: ...
TTY 3: ENBL DES: ...
TTY 12: DSBL DES: ether 1