Nortel Networks 1000E - Manual (Page 223)

Installing a Signaling Server Page 223 of 466
Communication Server 1000E Installation and Commissioning
Depending on whether the Signaling Server is configured as Leader,
Follower or Stand-alone, the Leader Signaling Server configuration
screen (Figure 99), the Follower Signaling Server configuration screen
(Figure 100) or the Stand-alone Signaling Server configuration screen
(Figure 101) appears.
Figure 99
Leader Signaling Server configuration
Figure 100
Follower Signaling Server configuration
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
Please enter the data networking and IP Telephony parameters for
this Leader Signaling Server.
Node ID : 276
Hostname : SS_Node276_Ldr
ELAN IP : 192.168.10.20
ELAN subnet mask: 255.255.255.0
ELAN gateway IP : 192.168.10.1
TLAN IP : 192.168.20.20
TLAN subnet mask: 255.255.255.0
TLAN gateway IP : 192.168.20.1
Node IP : 192.168.10.20
Call Server IP : 192.168.10.10
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=======================================================================
This Follower Signaling Server will obtain its data network and IP
telephony configuration from the Leader Signaling Server at boot.
To identify this Signaling Server, please enter a Hostname.
Hostname : SS_Node276_Ldr