Nortel Networks 1000E - Manual (Page 230)

Page 230 of 466 Installing a Signaling Server
NN43041-310 Standard 01.11 October 2008
Figure 107
Installation Tool quit confirmation
14 Enter q to close/terminate the Installation Tool and reboot the Signaling
Server.
End of Procedure
Adding a follower Signaling Server
After configuration and reboot, a Follower Signaling Server sends out
BOOTP requests and waits for a response. Since the Follower Signaling
Server is not yet configured in an IP Telephony node, there is no BOOTP
response. Do not wait for this response. Complete Procedure 45, “Adding a
Follower Signaling Server to an IP Telephony node,” on
page 231 .