Disabling a card unit – Nortel Networks 1000E User Manual
Page 345
Installing and configuring a Voice Gateway Media Card
Page 345 of 466
Communication Server 1000E
Installation and Commissioning
The list in the web page changes to show a list of diagnostics you can use,
as shown in Figure 148 on
3
Select Network & Peripheral Equipment Diagnostics from the list in
Figure 148 on
.
The Network and Peripheral Diagnostics web page opens, as shown in
Figure 149 on
.
4
Select the DISC – Disable Peripheral card command from the Card
Commands drop-down list.
5
Enter the card number in the corresponding Command Parameter text
box.
6
Click Submit to the right of the text box.
The output from this command is shown in the text box in the lower half
of the web page.
End of Procedure
Note: For graceful disabling of the voice gateway channels refer to
“Graceful Disable” in IP Line: Description, Installation, and Operation
(NN43100-500).
Disabling a card unit
Follow Procedure 77 to disable a Voice Gateway Media Card unit in
Element Manager.
Procedure 77
Disabling a Voice Gateway Media Card unit using Element Manager
1
Select System > Maintenance from the navigator.
The Maintenance web page opens as shown in Figure 147 on
This page allows you to perform maintenance using overlays or using a
selected functionality. The default is overlay, as shown in Figure 147.
2
Select Select by Functionality.
The list in the web page changes to show a list of diagnostics you can use,
as shown in Figure 148 on
3
Select Network & Peripheral Equipment Diagnostics from the list in
Figure 148 on
.