Nortel Networks 1000E - Manual (Page 369)

Configuring an IP telephony node Page 369 of 466
Communication Server 1000E Installation and Commissioning
1 Select IP Network > Node: Servers, Media Cards from the navigator.
The Node Configuration web page opens, as shown in Figure 160. If this
is the first node to be added, the “No nodes are configured” message is
displayed.
Figure 160
Node Configuration web page
2 Import the Node files from the leader Signaling Server.
a. Click Import Node Files.
The Import Node Files screen as shown in Figure 161 on page 370
appears.
b. Enter the ELAN IP address of the leader Signaling Server in the input
box.