Nortel Networks 1000E - Manual (Page 35)

Page 35 of 466
Communication Server 1000E Installation and Commissioning
38
Installation summary
Contents
This section contains information on the following topics:
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Installation tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Introduction
Before undertaking the installation, review the chapter entitled “Safety
instructions” on
page 31 .
See “System components” on page 39 to review the profiles of the key system
components. For information on the models of telephones compatible with
WARNING
Before a CS 1000E system can be installed, a network
assessment must be performed and the network must be
VoIP-ready.
If the minimum VoIP network requirements are not met,
the system will not operate properly.
For information on the minimum VoIP network
requirements and converging a data network with VoIP,
refer to Converging the Data Network with VoIP
(NN43001-260).