Nortel Networks 1000E - Manual (Page 208)

Page 208 of 466 Installing a Signaling Server
NN43041-310 Standard 01.11 October 2008
Figure 81
NRS type — co-resident Signaling Server
Figure 82
NRS type — stand-alone Signaling Server
13 Select the type of NRS to be provided by this Signaling Server. See
Figure 81 for a co-resident Signaling Server.
• If this Signaling Server is to be the Primary NRS, enter a.
• If this Signaling Server is to be the Alternate NRS, enter b.
• If this Signaling Server is not a stand-alone Signaling Server and is
to be the Fail-safe NRS, enter c.
Refer to Network Routing Service Installation and Commissioning
(NN43001-564) for more information on the NRS.
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
Please select the type of Network Routing Service (NRS) for this
Signaling Server.
Please enter:
<CR> -> <a> - Primary.
<b> - Alternate.
<c> - Failsafe.
Enter Choice>
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
Please select the type of Network Routing Service (NRS) for this
Signaling Server.
Please enter:
<CR> -> <a> - Primary.
<b> - Alternate.
Enter Choice>