Nortel Networks 1000E User Manual
Page 358
Advertising
Page 358 of 466
Installing the Main Distribution Frame
NN43041-310
Standard 01.11
October 2008
4
Tighten the velcro straps when you have connected each cable to the
system.
5
Terminate all the 25-pair cables installed at the cross-connect terminal.
6
Label all the cables at the cross-connect terminal blocks according to the
card slot assignment plan.
7
Connect the AUX cable in the upper 9-pin connector located on the top
left-hand side of the Media Gateway. See Figure 155 on
Figure 155
AUX cable connector
AUX
Advertising