Nortel Networks 1000E - Manual (Page 225)

Installing a Signaling Server Page 225 of 466
Communication Server 1000E Installation and Commissioning
Figure 102
IP Telephony parameter configuration
• Proceed to step 16 on page 213 .
• If this is a stand-alone Signaling Server and not associated with a
Call Server (that is, b was selected in step 11 on
page 206 ), enter the
TLAN subnet parameters as required. The Call Server IP address is
automatically set to 0.0.0.0.
The IP information applies to a temporary IP Telephony node. This
ensures that the existing node is not impacted. This also preconfigures
the IP Telephony node files. In Signaling Server: Installation and
Commissioning (NN43001-312), the node files are imported to Element
Manager for further configuration.