Nortel Networks 1000E - Manual (Page 337)

Installing and configuring a Voice Gateway Media Card Page 337 of 466
Communication Server 1000E Installation and Commissioning
Figure 143
Node Maintenance and Reports web page
2 Open the desired node by clicking on the + next to the Node ID.
This displays the Signaling Servers and Voice Gateway Media Cards
belonging to the node, as shown in Figure 144 on
page 337 .
Figure 144
Node Maintenance and Reports – expanded node
3 Click Status for the desired Voice Gateway Media Card.
The output from this command is displayed in the window pane
(result box).
The output can be one of the following:
xx.xxx.xxx.xxx : Disabled
xx.xxx.xxx.xxx : Enabled
xx.xxx.xxx.xxx : Unequipped