Nortel Networks 1000E - Manual (Page 429)

Installing and configuring Nortel IP Phones Page 429 of 466
Communication Server 1000E Installation and Commissioning
11 Choose one of the following:
a. Enter 0 to configure no VLAN.
The Nortel IP Phone displays:
Locating server...
After several seconds, the Nortel IP Phone prompts:
Connect Svc
Node: x
TN: x.x
Go to step 12.
b. Enter 1 to configure manual VLAN.
The Nortel IP Phone prompts:
VLAN: x
Go to step 12 on page 429 .
c. Enter 2 to configure automatic VLAN.
The Nortel IP Phone prompts:
VLAN: x
Go to step 12.
12 Enter the VLAN ID.
The Nortel IP Phone displays:
Locating server...
If you did not configure an Nortel IP Phone Installer Password, after
several seconds, the Nortel IP Phone prompts:
Node: x
TN: x.x
13 Enter the node number and the Nortel IP Phone's (virtual) TN then go to
step 16.
If you configured a Nortel IP Phone Installer Password, the Nortel IP
Phone prompts:
Node: x
PassWord: 0