Nortel Networks 1000E - Manual (Page 270)

Page 270 of 466 Connecting an MRV LX8020S-102AC-R Terminal Server
NN43041-310 Standard 01.11 October 2008
System
End of Procedure
Configuring the Terminal Server IP address
Procedure 60
Configure IP address for the Terminal Server
Note: The IP address can be configured or changed only from the local
Management/ DIAG port.
1 Configure the Terminal Server’s IP address:
InReach:0 >>config interface 1 address <ip address>
2 Configure the Terminal Server’s IP subnet mask:
InReach:0 >>config interface 1 mask <subnet mask>
3 Configure the Terminal Server’s IP primary gateway address:
InReach:0 >>config gateway <gateway ip address>
4 Save the configuration and check it:
InReach:0 >>save config flash
InReach:0 >>show system chara
InReach:0 >>show interface1 chara
Example commands:
InReach:0 >>config interface 1 address 47.11.244.101
InReach:0 >>config interface 1 mask 255.255.255.0
InReach:0 >>config gateway 47.11.244.101
End of Procedure