Nortel Networks 1000E User Manual
Page 415
Advertising
Installing and configuring Nortel IP Phones
Page 415 of 466
Communication Server 1000E
Installation and Commissioning
3
Click the desired node to expand it.
4
Click GEN CMD for the chosen Signaling Server or Media Card.
The General Commands web page opens, as shown in Figure 173.
Figure 173
General Commands
5
Select NodePwd from the Group drop-down list.
6
Select nodePwdShow from the Command drop-down list.
7
Click RUN.
The current node password information displays in the text area at the
bottom of the web page.
8
Select nodePwdSet from the drop-down list.
Advertising