Nortel Networks 1000E - Manual (Page 324)

Page 324 of 466 Installing and configuring a Voice Gateway Media Card
NN43041-310 Standard 01.11 October 2008
The Add VGW channels web page opens, as shown in Figure 131.
Figure 131
Add VGW channels
5 Enter the appropriate parameters to configure the VGW channels.
The TN is the logical TN of the first Voice Gateway Media Card unit.
Note: The Media Card has 8 or 32 channels. The ITG-P card has 24
channels.
6 Click Submit.
The VGW channels for this card are displayed. See Figure 132 on
page 325 .
Note: If you receive an error that a pad category table does not exist for
this customer, go back to your DTI configuration step, (see “Basic system
telephony configuration” on
page 457 ) and create a default DTI Data
Block (DDB), and then perform this procedure again.