Nortel Networks 1000E - Manual (Page 194)

Page 194 of 466 Installing a Signaling Server
NN43041-310 Standard 01.11 October 2008
The system verifies the file systems.
• If the hard drive of the Signaling Server is not partitioned, the file
systems verification process fails. Upon failure, the menu in
Figure 64 appears.
Figure 64
File systems verification failure
a. Enter a to partition and initialize the hard disk, and to reboot the
Signaling Server.
The system displays the messages:
Partitioning hard disk ...
Hard disk partitioning succeeded.
Creating filesystems ...
Filesystems creation succeeded.
Rebooting system ...
b. The Install Tool banner screen (Figure 63 on page 193 )
reappears. Go back to beginning of Step 2. If the hard drive of
the Signaling Server is partitioned, the following system
messages appear.
Filesystems verification succeeded.
c. Confirm or enter the date and time (Figure 65 on page 195 ).
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
The filesystems verification failed! (This is normal for a new
system.)
The hard disk must be (re)partitioned and (re)initialized. This will
erase all data on the hard disk. The system will then reboot and
the Install Tool will restart.
Please enter:
<CR> -> <a> - Partition and initialize the hard disk, then reboot.
Enter Choice> a