Nortel Networks 1000E User Manual
Page 267
Connecting an MRV LX8020S-102AC-R Terminal Server
Page 267 of 466
Communication Server 1000E
Installation and Commissioning
mask address and gateway address. The 20 Ports at the rear can be configured
for Serial Data Interface for CS 1000E system components.
This chapter contains the following procedures:
•
Procedure 59: "Connecting a Terminal Server to the system"
on
•
Procedure 60: "Configure IP address for the Terminal Server"
on
•
Procedure 61: "Running telnet from PC" on
•
Procedure 62: "Accessing a CS 1000E from a PC through telnet
Terminal Server" on
•
Procedure 63: "Configuring an rlogin port for various applications"
on
•
Procedure 64: "Accessing an MRV Console Port through the
on-board modem" on
IMPORTANT!
Before connecting the Terminal Server to another component of the
CS 1000E system, read and understand the documentation provided by
the Terminal Server’s manufacturer including the Quick Start Guide for
MRV server, LX Series Configuration Guide and MRV LX Series
Commands Reference Guide.