Figure 149 on – Nortel Networks 1000E User Manual
Page 343
Advertising
Installing and configuring a Voice Gateway Media Card
Page 343 of 466
Communication Server 1000E
Installation and Commissioning
Figure 149
Network & Peripheral Diagnostics web page
4
Choose the STAT — Get card status command from the Card
Commands drop-down list.
5
Enter the card number in the corresponding Command Parameter text
box.
6
Click Submit to the right of the text box.
The output from this command is shown in the text box in the lower half
of the web page.
End of Procedure
Advertising