Nortel Networks 1000E - Manual (Page 414)

Page 414 of 466 Installing and configuring Nortel IP Phones
NN43041-310 Standard 01.11 October 2008
4 Repeat Steps 2 and 3 for each Nortel IP Phone.
End of Procedure
Setting administrator and temporary IP Telephone
Installer passwords
Nortel IP Phone Installer Passwords is an optional feature that provides
protection against unauthorized modification of the TN on the IP Phones. For
detailed information about the Nortel IP Phone Installer Passwords, see
IP Line: Description, Installation, and Operation (NN43100-500).
The Nortel IP Phone Installer Passwords are configured on either a Signaling
Server or a Media Card in a node. The passwords then apply to all
components in the node.
Procedure 96
Setting passwords for the administrator and temporary
IP Telephone Installer
Note: This procedure can also be performed from the CLI of a Signaling
Server or Media Card.
1 Log in to Element Manager.
2 Select INetwork > Maintenance and Reports from the navigator.
The Node Maintenance and Reports web page opens, as shown in
Figure 143 on
page 337 .
Key 25 CHG, NUL
CHG – Charge Account key
Key 26 CPN, NUL
CPN – Calling Party Number key
Table 56
Nortel IP Phone dedicated soft key assignment (Part 2 of 2)
Nortel IP Phone key
number
Response(s) Allowed