Xerox 180 - Manual (Page 105)

SYSTEM CONTROL TASKS
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE 4-21
•
Commands. If you select this button, the log display contains
all operator-initiated task or feature requests.
• Debug. If you select this button, the log display contains the
complete log along with debug messages.
•
Start Date. Use this field to select the starting month, day, and
year for the console log display.
• Start Hour. Use this field to select the starting hour for the
console log display.
Step 4. Select either:
•
Display. Apply your selection and open the Console Log
Display window.
• Close. Close the Display Console Log window.
Step 5. If you select Display, the Console Log Display window appears (see
figure 4-16). It contains the information you selected.
Figure 4-16. Console Log Display window
When using the floppy, the following message will appear at the
bottom of the screen:
Insert Floppy before selecting “Apply/Close.”
Step 6. Select the Close header button to close the Console Log Display
window.