Unload an open-reel tape during a power failure – Xerox 180 User Manual
Page 156
Advertising
OFFLINE PRINTING TASKS
7-10
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
Then the following happens:
•
The tape rewinds through beginning of tape (BOT).
•
The tape reel is unclamped.
•
The tape door opens.
•
“
OK
” appears on the tape drive message display.
Step 2.
Remove the tape.
Unload an open-reel tape during a power failure
If power to the open-reel tape drive is cut off and you must unload the
tape reel before power is restored, follow this procedure.
Step 1.
Press the Power switch to the OFF position by pressing down the
side marked 0 (see figure 7-14).
!
Warning:
This is essential for safety reasons.
Figure 7-14. Power switch
Advertising