Xerox 180 User Manual
Page 213
STATUS AND PRINT TASKS
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
9-15
Step 2.
Perform the steps for one of the following functions:
•
Modify the cluster display
•
Edit an existing cluster
•
Delete an existing cluster
•
Create a new cluster
The steps for each of these functions are listed next.
Modify the cluster display
To modify the cluster display, do one of the following:
•
Select the All button to display clusters that have current trays
assigned to them.
•
Select the All Clusters button to display all clusters in the
system.
•
Select the Current Clusters button for a tray number to display
only clusters set up for that tray.
•
Select the Preferred Clusters button for a tray number to display
only preferred trays of all clusters using that tray.
Note:
To update the display for your selection, select the
Redisplay button.
Edit an existing cluster
Perform the following steps:
Step 1.
Highlight the cluster name in the display field.
The cluster name now appears in the Cluster Name field and the
appropriate tray information appears in the check boxes.
Note:
You can also display the cluster information by entering
the cluster name in the Cluster Name field and selecting the
Show header button.
Step 2.
Select the box(es) above the tray number(s) you want to assign to the
cluster or deselect the boxes above the tray numbers you want to
remove from the cluster.
Step 3.
Select either header button:
•
Set Preferred. Assign the new preferred trays to the cluster.
•
Set Current. Assign the new current trays to the cluster.
The tray information displayed for the cluster is updated with
the new tray assignments.
Note:
You can automatically assign the preferred trays to
the current trays, for a cluster by entering the cluster name
in the Cluster Name field and selecting the Set button.