Xerox 180 - Manual (Page 49)

USING THE PC UI
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE 2-13
Note: The following buttons are not shown in the window in
figure 2-6, but are found in the Auxilliary menu. If the window is
stretched to the right far enough all of these buttons would be
seen in the window and nothing would remain in the Auxilliary
wmenu.
•
Redisplay. This button resets any default values or information
to what they were when you opened the window or the last time
any changes were applied.
• Yes. This button confirms the question asked in the window and
closes the window.
•
No. This button does not confirm the question asked and closes
the window.
In addition, a window may have a Header button (or more than one)
whose actions are directly related to the window’s function.
c. Auxiliary menu. This icon contains other options not shown in the
window header due to lack of space. To open the auxiliary menu,
click on the icon with the left mouse button. Then select the option
you want. To close the auxiliary menu, click on the icon again, or click
anywhere on the desktop, except on a menu item.
d. Move/Resize targets. These targets allow you to reposition or
resize the window. Refer to the “Moving and resizing the window”
section of this chapter for instructions.
Scroll bars The scroll bars contain the following:
e. Scrolling targets. These targets allow you to move the contents of
a window up or down, left or right. Refer to the “Using the scroll bars”
section of this chapter for instructions.
f. Index bar. The index bar allows you to scroll through the window
more quickly than using the scrolling targets. Click on the gray
portion of the index bar to move the window information to the right
or left, or up or down. (If the index bar is all white, all the window
information is already displayed.)
Window interior The window interior contains the following:
g. Input fields. In these areas you may enter information.