Xerox 180 - Manual (Page 195)

HIP PRINTING TASKS
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE 8-13
Figure 8-6. Sample summary job queue display
The normal job queue display screen consists of:
• Two lines of header information
• Up to 20 lines of jobs status information
•
A message indicating the end of the display.
Note the following:
• If there are fewer than 20 jobs in the selected state, only that
number is displayed.
•
If there are more than 20 jobs in the selected state, all jobs are
not shown and the following message appears:
HP2145 ENTER ’HIP SHOW JOBS CONTINUE’ FOR MORE.
To display the additional jobs, enter the following command:
HIP SHOW JOBS CONTINUE
Figure 8-7 shows the format of a normal display screen
Figure 8-7. Example of HIP job status display
JID# HOST NAME RECEIVED STATUS JOB# TIME
nnnn<host name> hh:mm:ss status 000 hh:mm:ss
. . . COMPLETED . .
. . . COMPLETED . .
. . . STORED . .
... and n more COMPETED jobs
. . . PRINTING . .
. . . ACTIVE . .
. . . PENDING . .
. . . PENDING . .
. . . PENDING . .
. . . PENDING . .
. . . PENDING . .
... and n more PENDING jobs
. . RECEIVE . .
HP1110 END OF JOB DISPLAY
HOST:hst:linemode HIP:runmode FILEMODE:filemode
JID# HOST NAME RECEIVED STATUS JOB# TIME
nnnn host name hh:mm:ss status 000 hh:mm:ss
. . . . . .
. . . . . .
. . . . . .
HP1110 END OF JOB DISPLAY