Xerox 180 User Manual
Page 214
STATUS AND PRINT TASKS
9-16
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
Delete an existing cluster
Perform the following steps:
Step 1.
Highlight the cluster name in the display field.
Step 2.
Select the Delete header button.
Create a new cluster
Perform the following steps:
Step 1.
Enter the new cluster name in the Cluster Name field.
Step 2.
Select the box(es) above the tray number(s) you want to assign to the
cluster.
Note:
You assign only preferred trays to a new cluster.
Step 3.
Select the Autosize box if you want to apply the autosize option to the
new cluster. (Autosize allows you to load different size paper in
different trays.
Step 4.
Deselect the NR check box if you do not want to apply the No
Replace option to the new cluster. (No Replace keeps all cluster
definitions for trays, so that a tray can belong to more than one
cluster. The default value of the No Replace check box is “selected.”)
Note:
Depending on how your system was set up, you may not
have the NR option.
Step 5.
Select the Edit Preferred header button to assign preferred trays to
the new cluster.