Xerox 180 User Manual
Page 284
PROBLEM SOLVING TASKS
12-4
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
Note:
If your system is equipped with the optional 7 X 10
enablement kit, you have three levers, as illustrated in figure 12-
3. Turn the left lever to the left (counter clockwise), and the other
two levers to the right (clockwise) for heavy weight papers.
Figure 12-3. Locating the three heavy weight levers in systems
with the optional 7 X 10 enablement kit
Step 4.
When the print job is complete, return the levers to their normal
position.
Step 5.
Close the printer doors.
Note the following:
•
Position all levers for either the minimum or the maximum
pressure settings. Do not intermix the position of the levers.
•
Paper greater than 14 inch is considered oversized.
•
Paper heavier than 24 pounds is considered heavy weight.
•
The following factors may affect the positioning of the paper
levers:
—
machine tolerance
—
paper supplier
—
job type (e.g., duplex).