Xerox 180 User Manual
Page 211
STATUS AND PRINT TASKS
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
9-13
Tray Loading task through system
controller terminal (non-U.S. markets
only)
Perform the following steps:
Step 1.
When a print job calls for a stock change, the existing clusters appear
on the system controller display. The current trays field is blank for
undefined clusters.
Refer to the following example.
Step 2.
Load the correct stock in the correct trays.
Step 3.
To define the current trays for the undefined cluster, enter the
following command:
CLUSTER
cl-name tray number
Table 9-1 lists each parameter and its description.
BLUE
ASIZ
----PREFER--
-
1 3
----CURRENT---
1 3
---STATUS---
HAS TRAYS
GREEN
ASIZ
---PREFER---
2
---CURRENT---
---STATUS---
IS DEFINED
Table 9-1.
CLUSTER command parameters and descriptions
Parameter
Description
cl-name
Disables only the steady mode of the Attention
light.
tray number
The tray(s) in which stock for the cluster is
currently loaded.