Xerox 180 User Manual
Page 260
MAINTENANCE TASKS
11-4
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
Step 8.
Move the green handle to the left (the latched position) to secure the
lid of the cartridge (see figure 11-4).
Figure 11-4. Inserting and latching the dry ink cartridge
Step 9.
Hold the cartridge in place and pull off the paper seal.
Step 10.
Discard the seal along with the drop cloth.
Step 11.
Close the printer doors.
Note:
If any dry ink gets on your hands, wash them with soap
and cold water. Heat sets the ink permanently. If any dry ink
gets on your clothes, brush them with a dry paper towel or a stiff-
bristled brush. If this does not remove the ink immediately,
launder with detergent and cold water. Dry cleaners should be
told that the spot is dry ink for a printer, so they will not use a
solvent that sets the stain.