Xerox 180 User Manual
Page 109
SYSTEM CONTROL TASKS
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
4-25
Converting a console log
To convert a console log:
Step 1.
Follow the procedure described in step 1, a-b, of the “Displaying a
console log” section earlier in this chapter.
Step 2.
Select the “Convert” option from the header auxiliary menu of the
Console Log window to open the Convert window.
Figure 4-22. Convert window
Step 3.
Enter an ID for the converted file in the Save converted Console Log
as field.
Note the following:
•
The ID can be up to twelve characters—eight characters for the
name and three for the extension, including a period.
•
You cannot enter a path name (directory).
•
The name cannot be the same as the console log file name.
Step 4.
Select the format for the converted console log from the Format
field’s auxiliary menu.
Note:
In conversion to EBCDIC, any multinational characters
in the console log are lost.
Step 5.
Select Overwrite if you want any other destination files with the same
name to be overwritten.
Step 6.
Select either:
•
Apply/Close. Apply your selection and close the Convert
window.
•
Close. Close the window.
Note:
The converted console log is stored on the PC UI hard disk.
You can copy the converted console log to a PC UI floppy disk with
the MS-DOS BACKUP command.