Xerox 180 - Manual (Page 204)

STATUS AND PRINT TASKS
9-6 XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
Printer Status task through
PC UI windows
Select “Printer Status” from the Print Tasks menu to open the Printer
Status window (see figure 9-2).
Note: If you are running print jobs using command files, follow the
instructions in the “Printer Status task through command line”
section.
Figure 9-2. Printer Status window
The Printer Status window provides:
• A mimic of the printer, showing:
— Current status of all paper trays, including the size of paper
loaded in the tray
— Current status of all stacker bins, including the size of
paper stacked in the bin
— Current report's cluster names.
•
Header buttons allowing you to perform tray, bin, and cluster
tasks.
Note: The sizes on the feeder tray and stacker bin mimics appear
in inches or millimeters depending on the selection of the Units
window. To choose the unit of measurement, select the “Units” option
from the Printer Status window's header auxiliary menu. Then select
the Inches or Millimeters radio button. (Refer to the “Select Units”
section of this chapter for additional information.)