Xerox 180 - Manual (Page 33)

SYSTEM OVERVIEW OF THE XEROX DOCUPRINT 180 LPS
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE 1-17
Bypass Transport Module
The Bypass Transport Module moves paper from the stacker to a
third party finishing device (for example, a stitcher). When installed,
the Bypass Transport Module is attached to the last feeder/stacker
module. Figure 1-14 shows the Bypass Transport Module.
Figure 1-14. Bypass Transport Module and input enablement
device
1 Bypass Transport paper output location
2 Input enablement device paper input location
Input enablement device
The input enablement device allows your Xerox DocuPrint 180 to
support and interface directly with feeders. As shown in figure 1-15,
it is located on the right side of the last feeder/stacker. Figure 1-15
shows the input enablement device.
7 X 10 enablement kit
The 7 X 10 input enablement kit allows your Xerox DocuPrint 180 to
print on 7 by 10 inch/178 by 254 mm paper size, with throughput
speed of up to 206 PPM.