Xerox 180 User Manual
Page 293
PROBLEM SOLVING TASKS
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
12-13
Figure 12-16.Area 9
Note the following:
•
Lower tray 1 and pull out tray to allow better access, when
clearing area 9.
•
Pull the area 9 green lever toward you to unlatch it. Ensure that
you relatch the lever once you have cleared any paper in this
area. You may also want to pull out tray 1 and hold the green
lever down in order to remove paper wedged in this area more
easily.
•
Area 9 also has a green knob (located to the right of the lever),
which can be turned to help you clear paper.
•
If paper rips as you are removing it from area 9, or if you have
difficulty removing paper from this area, you may have to use
the pinch lever located further inside area 9. Paper may be
caught in this area when doing duplex printing.
To use the pinch lever located inside area 9:
Step 1.
Locate the green pinch lever directly behind area 9 (above the green
knob and further inside area 9).
Step 2.
Carefully reaching your hand into the area, squeeze the edges of the
pinch lever and lift it up.
Caution:
This area of the printer may be hot. Be careful when
inserting your hand.
Step 3.
Remove any paper caught in this area.
Step 4.
Replace the green pinch lever to its original position. Make sure that
you relatch the lever once you have cleared any paper in this area.