Select feeder trays – Xerox 180 User Manual
Page 206
STATUS AND PRINT TASKS
9-8
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
Select feeder trays
Use this task to override stock selections in the print job and force
printing of a job using a specific tray, cluster, or a feeding device.
Select Feeder Trays task
through windows
Perform the following steps:
Step 1.
Select the Feed Mode header button from the Printer Status window
to open the Feed Mode window (see figure 9-4).
Figure 9-4.
Feed Mode window
Note:
Options 5, 6, and 7 only appear if the system is
configured with these parts.
Step 2.
Select one of the following options:
•
To use the clusters set up in the print job, select MAIN from the
Feed Mode window.
•
To feed paper from the Aux cluster, select AUX from the Feed
Mode window.
•
To feed paper from all trays, select AUTO from the Feed Mode
window.
•
To feed paper using a specific cluster, select Cluster... to open
the cluster window, then select an option from the displayed list.
•
To feed paper from a specific tray, select the tray number from
the Feed Mode window.
•
To feed paper from a bulk feeder, select 7 from the Feed Mode
window.
MAIN
AUX
AUTO
1
2
3
4
5
6
7
Cluster...