Xerox 180 - Manual (Page 141)

ONLINE PRINTING TASKS
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE 6-5
Start Job task through command line To start printing an online job, enter the following command:
START [[ jde][,[jdl][,,[copies][,FORM=form]]]]
Table 6-1 lists each parameter and its description.
Refer to the Xerox DocuPrint 180 LPS Operations Reference for
further information.
Table 6-1. START command parameters and descriptions
Parameter Description
START Specifies the command, to be followed by any or
all of the specifications as needed.
jde The name or number of the job descriptor entry
which may be up to six characters in length.
jdl The name or number of the job descriptor library
which contains the JDE task used. The name or
number may be up to six characters in length.
, (comma) The comma replaces the multi/single report
mode parameter when giving the START
command online.
copies The requested number of prints for each report.
FORM= form The name of the form to be used. The extension
.FRM is optional.